CO2 Meter Controller

$1,500

Brand:

CO2 Meter Controller offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room’s CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. It also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The CO2 Controller’s memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from CO2 meter. Comes with CO2 regulator.

Weight 3 kg
Dimensions 26 × 26 × 22 cm
Read More

You may also like…

Grow Science CO2 Controller can be used in greenhouses, hydroponics rooms, mushroom houses, growth cabinets, and other places where elevated carbon dioxide levels are used to maximize plant growth.

  • Accurate CO2 Generator Control
  • Photo Sensor Turns off CO2 at Night
  • Easy Fresh-Air Calibration

 

The Day/Night CO2 Monitor & Controller lets you set minimum and maximum carbon dioxide levels. When the minimum level is sensed, power is supplied to a CO2 generator or regulator via the built-in 110-240 VAC 5A piggyback power cord. When the maximum level is reached, the power is turned off.

In addition, the CO2 Monitor & Controller has a built-in photo sensor that overrides the CO2 control and shuts off the CO2 when it senses darkness. Photo sensor control saves dollars and energy by ensuring you’ll only be supplying CO2 during the light cycle when it is needed.

Best of all, the CO2 Monitor & Controller is easy to install and use. Simply mount the unit inside your greenhouse (all cables and hardware included), plug it into a standard wall jack, plug in your CO2 generator or regulator, and it is ready to maximize your plant growing yields.

Features

  • A large digital LCD display clearly indicates the current CO2 level and temperature
  • Easy to read display with all functions set from 3 push buttons
  • Power, upper limit, lower limit, and photo sensor verification LEDs
  • IP54 Enclosure – cover during cleaning, fertilization, or washdown

CO2 flow meter and solenoid valve tank regulator

This is an accurate, easy-to-adjust CO2 regulator and flow meter that supports from 10 to 60 cubic feet per hour with an electronic solenoid valve. It also comes with a tank pressure gauge, an easy-to-read square-shaped flow meter, and a 6-foot power cord. It will work with any 120VAC control device.

Simply add overhead tubing (CO2 is heavier than air) to disperse CO2 evenly throughout your grow room.

Features

  • Compatible with any 240/120VAC device
  • Forged brass body and bonnet for maximum strength
  • The safety relief valve is set for safe operation
  • Sintered metal inlet filter to trap impurities
  • No soldered joints for easy maintenance
  • Easy to read dual scale gauges (Bar and P.S.I.) with virtually unbreakable screw-on lean lens
  • Gauges meet EN 562 and BAM approved dual scale (Bar/P.S.I.) and are marked for maximum working pressure
  • Outlet with control valve

 

THE GROW SHOP PRODUCT TIP: THIS IS BY FAR THE BEST CO2 CONTROLLER ON THE MARKET IN AUSTRALIA. PLUG AND PLAY ARE SIMPLE AND EASY TO USE. JUST SET YOUR HIGH AND LOW CO2 PPM LEVELS, AND THE CONTROLLER WILL DOSE YOUR GROW SPACE TO YOUR REQUIREMENTS. THESE CONTROLLERS ARE BEST USED IN SEALED GROW SPACES.

Your Cart