THE ONE, THE ONLY, SUPERTHRIVE TRUSTED BY GROWERS FOR DECADES.
SUPERthrive® is a highly concentrated non-toxic vitamin solution invigorating all variety of greenery for home gardeners and professionals alike. It is equally suited for hydro-seeding, hydroponics, and foliar spraying.
SUPERthrive® maximizes potential by quickly building a strong root base and reducing transplant shock. SUPERthrive® replenishes the soil to nourish and encourage the natural building blocks that plants make themselves under optimum conditions.
Since 1939, SUPERthrive® remains a primary gardening and grower’s tool to promote chemical balance, increase crop yield, secure landscaping, and safely transplant trees of any size.
General Instruction for use:
- Apply to thirsty soil.
- Apply with or without fertilizers (see specific dosages below).
- Use mixed solution the same day, especially if adding fertilizer.
- Do not water plants for 24 hours after application.
- High-clay soils: make soil penetrable by mixing in coarse particle materials. You may use a root injector to reach roots.
- Do not inject directly into trees.
General Maintenance Tips:
- Weekly/Monthly Plant Maintenance: 1/4 tsp./gallon; 3 oz./100 gallons.
- Daily Maintenance: 2T. (1 oz.)/100 gallons.
- Household Plants: Drop-a-Cup (1/4 tsp/gallon; 3 oz./100 gallon)
Transplanting:
Trees
- Use 1 tsp. of SUPERthrive per gallon of water before and after transplanting.
- Soak bare roots in the prepared hole using SUPERthrive water for 15 minutes, or until the air bubbles stop.
- Treat root balls with 2 T. of SUPERthrive per 5 gallons of water.
Plants
- Use 1 tsp./gallon of water before and after transplanting.
- Roses: soak roots for 15-30 minutes using 1 1/2 tsp./5 gallons of water.
Landscaping
Parks and Recreation
- Lawns: Use 3 oz./100 gallons (sprays roughly 1,000 sq. ft.).
- Trees: Follow proportioner instructions to achieve the 3 oz./100 gallons mixture. Remember to spray both sides of the leaves.
- Flowers: Use 1/4 tsp./gallon or 3 oz./100 gallons.
Sports Turf
- Use 3 oz./100 gallons (sprays roughly 1,000 sq. ft.)
Hydroseeding / Erosion Control
- Use 1/2 oz./100 gallons.
Field Crops
Hydroseeding (for farming)
- Use 1/2 oz./100 gallons.
- Seed Sowing
- 3 oz./100 gallons.
Green Houses
- Weekly/Monthly Plant Maintenance: 1/4 tsp./gallon; 3 oz./100 gallons.
- Daily Maintenance: 2T. (1 oz.)/100 gallons.
- Use 1/4 tsp./gallon on plants, vegetables, and flowers.
- Foliar spraying: Refer to the proportioner to achieve the 3 oz./100 gallons ratio.
Orchards (Fruits, Nuts, Vineyards)
- Foliar Spraying: Refer to the proportioner to achieve the 3 oz./100 gallon ratio.
- Tree Health: Use 1 tsp./gallon in the soil at tree’s base weekly or monthly. Wait at least 24 hours before watering again.
Hydroponics
- Use 2-3 oz./100 gallons when changing or adding water. For smaller systems, this is equivalent to 1 1/2-2 tsps./10 gallons.
Home Use (Indoor & Outdoor Plants)
- Use 1/4 tsp./gallon or 3 oz./100 gallons.
Edible Gardens
- Use 1/4 tsp./gallon or 3 oz./100 gallons. You can also use a foliar spray on above-ground plants. Just follow the manufacturer’s directions to achieve the above mixture.
